User`s manual

146
The brand new source unit only has a 1 RAID volume ‘RAID”.
1. When adding a new backup task with “Full backup” or “Custom backup” and
enabling the option “Backup NAS Config” as shows below, the source unit
system configurations are then backed up to the designed path on the target
system every time the task is executed.
2. Click on “Restore NAS Configuration” and the screen shown below will appear.
Input the target server’s IP address where the system configuration has been
backed up, and necessary authentication info. Confirm by doing a “Connection
Test” to make sure the communication between the source and the target
server works.