User`s manual

145
The iSCSI backup can see the result as below. The task “iSCSI_pmtest” has backup
to target 172.16.66.111 and share folder NAS_Public with file “iSCSI_pmtest”.
Restore
To restore a backup from the backup task, simply select a task from the task list
then click “Restore” from the function bar. The restore task will start to have the
associated files/folders from the target server restored to the source.
Restore NAS Configuration
This is a useful feature if the system configuration needs to be restored to a brand
new unit. Let’s go thru the following example to see how it works.
The original source system has 3 RAID volume, “RAID”, ‘RAID10” and “RAID20”,
and has backed up the system configurations to the target server.
NOTE
• The source folder name will use iSCSI_+target volume name. So here
it is displayed as “iSCSI_pmtest”. pmtest is the iSCSI target name
when the iSCSI target was created.
NOTE
• To restore task with backup type set as “Real time”, first you need to
stop the task then you can proceed with the restore operation.