User`s manual

45
hard disks. A blank line indicates that a hard disk is not currently installed in that
particular disk slot.
Disks Information
Item
Description
Disk No.
Indicates disk location.
Capacity
Shows the SATA hard disk capacity.
Model
Displays the SATA hard disk model name.
Link
Displays the hard disk interface and link speed
Firmware
Shows the SATA hard disk firmware version.
Status
Indicates the status of the disk.
Bad Block scan
Yes to start scan Bad Block.
S.M.A.R.T. Information
On the Disk Information screen, the status of each disk will be displayed in the
Status column. Clicking on the OK or Warning link will display the S.M.A.R.T
Information window for that particular disk.
You may also perform disk SMART test (doesn’t apply to SAS HDD); simply click
“Test” to start the SMART test. The result is only for reference and the system will
not take any action from its result.
NOTE
• The screen shot below is just an example from a Thecus IP Storage. The disk
slots number can range from 8, 12 to 16 slots depending on the model of Thecus
IP storage.