User`s manual

43
Link1 Configuration
Status
Specifies the network ports being used with the associated link aggregation.
Click on to modify the selected network ports.
Jumbo Frame Support
Enable or disable Jumbo Frame Support of the associated interface on your
Thecus IP storage.
Link Type
Select from drop down list for desired mode.
IPv4/IPv6
Click to enable IPv4/IPv6 for TCP/IP. The default is IPv4 enabled.
Mode
It has to be a static IP with the link aggregation being used.
IP
IP address of link aggregation.
Netmask/Prefix Length
Input netmask for IPv4 and Prefix length for IPv6.
Gateway
Gateway for associated link aggregation
Default gateway
It can be chosen from the drop down list of default gateway being used for
the Thecus IP storage.
Now under the networking, a “Link1” tab will appear from the network title bar.