User`s manual

29
“error”, “Information” and “warning”.
If client has been selected then “Local” or “Remotely” can be
choose.
Target
Choose Local, all system logs will be stored in an associated
syslog folder filled in from next filed. And the syslog folder will
have file “messages” to store all system logs. If Remotely has
been selected, a syslog server is needed and an IP address is
required.
Syslog folder
Select from a drop down share list, all of the system logs will be
stored on it. This syslog folder is applied to “syslog server” or
“syslog client” with “local” selected.
Log Level
The user can choose from 3 different levels. “All”,
“Warning/Error” or “Error”.
Remote IP Address
Input the syslog server IP address if choose to store syslog info
remotely.
System Monitor
The system monitor is capable to monitor system status including CPU/memory
utilization, fan/temperature status, network throughput and on-line user list in
various protocols.
To monitor system status, simply click on “System Monitor” from the tree menu
and the screen will appear as below.
It is divided into 4 sections. Each section can be modified to monitor specific items
by using the drop down list from the “Monitors” tab, simply click on the items you
would like to monitor. From each section, you can also choose to display the
information graphically by selecting “Graphic” or by plain text mode by selecting
“Details”.
NOTE
Only 2 sections can be set in graphic mode at
the same time.