User`s manual

Reading the note and check on “Accept” for confirmation.

Now, from the data guard task list will have created task listed. To start the iSCSI

volume backup, select the task and click “Start” from task bar.

Once “Start” click, the associated iSCSI volume will not allow to I/O during backup

processing. And the task status will change to ‘Processing”.

States change to “Finish” after task complete.

From the RAID volume folder ‘andy_local’, it has backup iSCSI volume file stored.

This backup iSCSI volume file is needed while it required import to storage. Next

topic will describe about this.