User`s manual

33
LCD Operation
The N4100EVO is equipped with an LCD on the front for easy status display and
setup. There are four buttons on the front panel to control the LCD functions.
LCD Controls
Use the Down ( ), Up ( ), Enter ( ↵
↵↵
↵ ) and Escape (ESC) keys to operate LCD to
view system information and USB copy.
The following table illustrates the keys on the front control panel:
LCD Controls
Icon Function Description
▲ Up Button Select the previous configuration settings information.
▼ Down Button Select the next configuration settings information
↵
↵↵
↵ Enter Enter for the USB copy confirmation message.
ESC Escape Escape and return to the previous menu.
There are two modes of operation for the LCD: Display Mode and Management
Mode.
Display Mode
During normal operation, the LCD will be in Display Mode.
Display Mode
Item Description
Host Name Current host name of the system.
WAN Current WAN IP setting.
LAN Current LAN IP setting.
Disk Info Current status of disk slot has been installed
RAID Current RAID status.
System Fan Current system fan status.
2006/06/16 12:00 Current system time.
NOTE
The Thecus Setup Wizard is designed for installation on systems running Wind
ows
XP/2000/vista/7 or Mac OSX or later. Users with other operating systems will
need to install the Thecus Setup Wizard on a host machine with one of these
operating systems before using the unit.