Datasheet

1. Package Contents
No. Name Quantity
1 Thecus N1050 1 pc
2 USB cable 1 pc
3 AA Battery Case 1 pc
4 Protective Pouch 1 pc
5 USB-DC Power Supply Wire 1 pc
6 User Manual 1 pc
7 Mounting Screw A few
2. Hard Disk Installations & Configurations
Step 1: Remove screws & Cover Step 2: Insert a 2.5” IDE HDD
and fasten with mounting
screws
Step 3: Replace cover & fasten
the screws
Connect the N1050 to a PC to format your HDD. You need at least one FAT32 partition on your HDD in order to
copy files from your digital cameras, MP3 players or USB disks.
4. Product Function Introduction
1) LEDs:
1. Power / Copy Shows the power status (on/off), or the battery status. It is steady bright green if it is
powered on (either AA battery or bus power); blinking light indicates the status of data
transferring between different USB devices, or data transferring between PC and
N1050 as external hard disk. The copy procedure is finished if the light restores
stability, and ready for next action.
2. ERR Error LED. Light on or flickering shows there are errors during transferring data, and
you need to check up.
3. Copy OK Indicates the copy process has finished when the unit is in OTG mode.