User`s manual

8. Finished! Access the N4100PRO Web Administrator Interface by pressing
the Start Browser button. You can also configure another N4100PRO at
this point by clicking the Setup Other Device button. Press Exit to exit
the wizard.
The Thecus Setup Wizard is designed for installation on systems
running Windows XP/2000 or Mac OSX or later. Users with other
operating systems will need to install the Thecus Setup Wizard on a
host machine with one of these operating systems before using the
unit.
NOTE
LCD Operation
The N4100PRO is equipped with an LCD on the front for easy status display and
setup. There are four buttons on the front panel to control the LCD functions.
LCD Controls
Use the Down (▼), Up (▲), Enter (↵) and Escape (ESC) keys to operate LCD to
view system information and USB copy.
The following table illustrates the keys on the front control panel:
LCD Controls
Icon Function Description
▲
Up Button Select the previous configuration settings information.
▼
Down Button Select the next configuration settings information
↵
Enter Enter for the USB copy confirmation message.
ESC Escape Escape and return to the previous menu.
There are two modes of operation for the LCD: Display Mode and Management
Mode.
Display Mode
During normal operation, the LCD will be in Display Mode.
Display Mode
Item Description
Host Name Current host name of the system.
WAN Current WAN IP setting.
16