User`s manual

Module Management
Item Description
Name Displays the name of the module.
Version Displays the module version.
Description The description of the module.
Enable Displays whether the module has been enabled or not.
Status Displays the status of the module.
Uninstall Click to uninstall the module.
Enable (button) Click to enable a module.
Disable Click to disable a module.
Browse Click to browse the folder of your PC to locate the module files.
Install Click to install the listed module into your N0204 miniNAS
Reset to Factory Default Settings
From the System menu, choose the Factory
Default item and the Reset to Factory
Default screen appears. Press Apply to reset
the N0204 miniNAS to factory default settings.
Press Cancel to go back to the main menu.
Upgrading System Firmware
From the System menu, choose the Firmware
Upgrade item and the Firmware Upgrade
screen appears.
Follow the steps below to upgrade your
firmware:
1. Use the Browse button to find the
firmware file, and then press Apply.
2. Press OK to upgrade the Firmware.
3. During the firmware upgrade was in
process, the system will appear the rate
of progress.
4. Once the upgrade is complete, the
system will pop a message; press OK to reboot the system.
WARNING
Resetting to factory defaults will not erase
the data stored in the hard disks, but WILL
revert all the settings to the factory default
values.
37