User`s manual

Modifying Groups

1. On the Local Group Configuration screen, select a group name from the list.

2. Press the Modify button to modify the members in a group.

3. To add a user into a group, select the user from the Users List, and press the <<

button to move the user into the Members List.

4. To remove a user from a group, select the user from Members List, and press the

>> button.

5. Click the Apply button to save your changes.

Deleting Groups

1. On the Local Group Configuration screen, select a group name from the list.

2. Press Delete to delete the group from the system.

System Settings

The System menu gives you a wealth of settings that you can use to configure your N0204

miniNAS’s system administration functions. You can set up system notifications, view system

logs, and even upgrade firmware from this menu.

System Notifications

From the System menu, choose the

Notification item, and the Notification

Configuration screen appears. This screen lets

you have the N0204 miniNAS notify you in case

of any system malfunction. Press Apply to

confirm all settings. See following table for a

detailed description of each item.

NOTE

Consult with your mail

server administrator for

email server information.

Notification Configuration

Item Description

Email Notification Enable or disable email notifications of system problems.

SMTP Server Specifies the hostname/IP address of the SMTP server.

Port Specifies the port to send outgoing notification emails.

Auth Type Select the SMTP Server account authentication type.

SMTP Account ID Set the SMTP Server Email account ID.

Account Password Enter a new password.

Confirm Account

Password

Confirm a new password.

Receiver’s E-mail

Address

Add one or more recipient’s E-mail addresses to receive E-mail

notifications.

Test E-Mail Click to send out a test E-mail to make sure the settings are correct.