User`s manual

LAN Configuration
Item Description
Host name Host name that identifies the N0204 miniNAS on the network.
Domain name Specifies the domain name of the N0204 miniNAS.
MAC Address MAC address of the network interface.
Jumbo Frame Support Enable or disable Jumbo Frame Support of the LAN interface on your
N0204 miniNAS.
LAN Port Enable or disable the N0204 miniNAS from obtaining in IP address via
DHCP server. If you require a static IP, disable this feature and input
your network configuration.
IP IP address of the LAN interface.
Netmask Network mask, which is generally: 255.255.255.0
Gateway Default Gateway IP address.
DNS Server Domain Name Service (DNS) server IP address.
IP Sharing Mode When enabled, PCs connected to the LAN port will be able to access the
LAN. Default is Disabled.
29
• Only use Jumbo Frame settings when operating in a Gigabit environment where all other client
have Jumbo Frame Setting enabled.
• Enabling DHCP automatically turns on UPnP—sees the Service Support Screen.
• A correct DNS setting is vital to networks services, such as SMTP and NTP.
NOTE
s
Most Fast Ethernet (10/100Mbps) Switches/Routers do not support Jumbo Frame and you will not
be able to connect to your N0204 after Jumbo Frame is turned on. If this happens, please reset
your N0204 network settings and it will turn off Jumbo Frame Support. How to do? Please refer
to:
Chapter 8: Troubleshooting -> Resetting NAS IP Address and Admin Password
WARNING