User`s manual

USB Information
Item Description
Disk No. Number assigned to each USB disk.
Capacity (MB) Shows the capacities of each USB disk in megabytes (MB).
Model Displays the model names of each USB disk.
Firmware Shows the firmware version of each USB disk.
Status Shows the status of each USB disk. An Eject button appears beside each
USB disk. Press this button before removing the USB disk.
Refresh Press Refresh to rescan the status of the USB disks.
RAID Information
From the Storage menu, choose the RAID
item and the RAID Information screen
appears.
This screen lists the RAID volume currently
residing on the N0204 miniNAS. From this
screen, you can get information about the
status of your RAID volume, as well as the
status, used percentage, and stripe size.
To configure your RAID settings, press the
Config button to go to the RAID
Configuration screen.
RAID Information
Item Description
RAID Level Shows the current RAID configuration.
Total Capacity Total capacity of the current RAID.
Status Indicates status of the RAID. Can read either Healthy, Degraded, or
Damaged.
Used Percentage Indicates total percentage used of the RAID volume.
Stripe Size Indicates the current stripe size being used.
Remaining Time Indicates the time remaining until the RAID volume is built.
Config Press this to configure RAID volumes.
RAID Configuration
On the RAID List screen, press the RAID Config button to go to the RAID Configuration
screen. In addition to RAID disk information and status, this screen lets you make RAID
configuration settings.
For more information on RAID, see
Appendix C: RAID Basics.
RAID Level
You can set the storage volume as JBOD,
RAID 0, or RAID 1, RAID configuration is
usually required only when you first set up
the device. A brief description of each
RAID setting follows:
24