User`s manual

3. Install the tray with HDD into N0204, please note
that the HDD-1 is in left side and HDD-2 is in
right side. The triangular symbol of tray must be
corresponding with the triangular symbol of back
panel. Push the tray back.
To con network, follow the steps below:
1.
2.
3. Press the Power bu
miniNAS.
--
Cable Connections
nect the N0204 miniNAS to your
Connect an Ethernet cable from your
network to the LAN port
panel of the N0204 miniNAS.
Connect the provided power adapt
the power socket on the back panel.
Plug the other end of the cord into
surge protector socket.
on the back
or into
a
tton on the Rear end to boot up
or shut down the N0204
NOTE
1. USB copy LED will be
flashed Blue light
during the system are
booting and will be dull
after the booting
complete.
2. To shut down the
system, press the
power button over 4
seconds, then USB
copy LED will be
flashed Red light,
release power button.
12