User`s manual

Network Configuration (NIC port)

Link speed

Display associated NIC port link speed.

Link status

Display associated NIC port link status.

MAC address

MAC address of the network interface.

Jumbo Frame Support

Enable or disable Jumbo Frame Support of associate interface on your

Thecus IP storage.

IPv4/IPv6

Click to enable IPv4/IPv6 for TCP/IP. The default is IPv4 enabled.

Mode

It can choose a static IP or Dynamic IP.

IP address of associate NIC interface.

Netmask/Prefix Length

Input netmask for IPv4 and Prefix length for IPv6.

Gateway

Gateway for associate NIC.

Default gateway

It can be chosen from a drop down list of default gateway that’s been used

for the Thecus IP storage.

DHCP/RADVD

From the System Network menu, choose DHCP/RADVD, and the

DHCP/RADVD Configuration screen appears. This screen displays available NIC

status. If each NIC has been set-up to a static IP, then each NIC can be configured

to act as DHCP/RADVD server.

WARNING

Most faster Ethernet (10/100) Switches/Routers do not support Jumbo Frame and will not be

able to connect to your Thecus NAS after Jumbo Frame is turned on.

NOTE

• Only use Jumbo Frame settings when operating in a Gigabit environment where

all other clients have Jumbo Frame Setting enabled.

• Proper DNS setting is vital to networks services, such as SMTP and NTP.