User`s manual

Notification Configuration

Item

Description

Beep Notification

Enable or disable the system buzzer that beeps when a problem

occurs.

Email Notification

Enable or disable email notifications of system problems.

Authentication Type

Select the SMTP Server account authentication type.

SMTP Server

Specifies the hostname/IP address of the SMTP server.

Port

Specifies the port to send outgoing notification emails.

SMTP Account ID

Set the SMTP Server Email account ID.

Account Password

Enter a new password.

Log Level

Select the log level to send the e-mail out.

Sender’s E-mail

Address

Set senders email address to send email notifications.

Receiver’s E-mail

Address (1,2,3,4)

Add one or more recipient’s email addresses to receive email

notifications.

Firmware Upgrade

From the menu, choose the Firmware Upgrade item and the Firmware Upgrade

screen appears.

Follow the steps below to upgrade your firmware:

1. Use the Browse button to find the firmware file.

2. Press Apply.

3. The buzzer will beep and the Busy LED will blink until the upgrade is

complete.

NOTE

Consult with your mail server administrator for email server

information.

NOTE

• The buzzer only beeps if it is enabled in the System Notification menu.

• Check Thecus website for the latest firmware release and release notes.

• Downgrading firmware is not permitted.