User`s manual

Enable/Disable Click to enable a module.

Check Update Click to look for updates for the selected module.

Module File Location of the module file.

Browse Click to browse the folder of your PC to locate the module files.

Install Click to install the listed module into your N7700

Reset to Factory Default Settings

NOTE

Modules can potentially harm your system. Only install modules f

rs you can trust. your vendor, or publishe

From the System menu, choose the

actory Default item and the Reset to

actory Default screen appears. Press

pply to reset the N7700 to factory default

ettings. Press Cancel to go back to the

ain menu.

rom the System menu, choose the

creen appears.

to upgrade your

rmw re:

firmware file.

2. Press Apply.

3. The beeper beeps and the Busy LED

Resetting to factory defau

disks, but WILL revert a

lts will not erase the data stored in the hard

ll the settings to the factory default values.

WARNING

Upgrading System Firmware

Firmware Upgrade item and the

Firmware Upgrade s

Follow the steps below

afi

1. Use the Browse button to find the

blinks until the upgrade is complete.

• The beeper only beeps if it is enabled in the System Notification

bsite for the latest firmware release and release

NOTE

menu.

• Check Thecus we

notes.

WARNING

Do NOT turn off the system d

will lead to a catastrophic resu

uring the firmware upgrade process. This

lt that may render the system inoperable.