User`s manual

WEP KEY 2
WEP KEY 3
WEP KEY 4
When connecting, be sure to enter the same key and select the
same index number on each client machine.
A DHCP server can be configured to assign IP addresses to devices connected to
L AN ports.
WLAN DHCP Configuration
Item Description
DHCP Server Select to enable or disable DHCP server.
Start IP Specifies the starting IP address of the DHCP range.
End IP Specifies the ending IP address of the DHCP range.
DNS Server Specifies the DNS server IP address.
48
n
press Apply
co ur set
ach ows:
NOTE
The IP Segment of WLAN, WAN and LAN should not overlap.
NOTE
Users should obey the international RF regulatory rules as they set up
the wireless RF channel on the N7700. The RF operating channels for
different regions have been specified as following. Thecus has no
responsibility for users attempting to violate the international RF
regulation.
11 N. America
14 Japan
13 Europe (ETSI)
2 Spain
4 France
Web Services Configuration
From the Network menu, choose the
Service item, and the Web Service screen
appears. This screen displays the service
support parameters of the system. You ca
change any of these items and
to nfirm yo
item foll
tings. A description of
e
NOTE
• Disable HTTP support and
Enable Secure HTTP support
to guarantee secure access.
In some environments, due to
security concerns, you may
wish to d
•
isable SMB/CIFS as a
precaution against computer
viruses.
Web Service
Item Description
HTTP (WebDisk)
Support he port number
Enable or disable WebDisk support. Enter the port number if this
option is enabled. T
HTTPs (Secure
WebDisk) Support
Enable or disable secure WebDisk support. Enter the port if this
option is enabled.
SMB/CIFS Enable or Disable SMB/CIFS protocol for Windows, Apple, Unix
drive mapping.
UPnP Enable or disable Universal Plug and Play protocol. UPnP helps to
P address of the N7700. find the I