User`s manual
DHCP Configuration
Item Description
DHCP Server lly assign IP Enable or disable the DHCP server to automatica
address to PCs connected to the LAN interface.
Start IP Specifies the starting IP address of the DHCP range.
End IP Specifies the ending IP address of the DHCP range.
DNS Server Displayed the DNS server IP address.
NOTE
The IP Segment of WAN and LAN should not overla
p.
47
is
nu
s and press
pply to confirm your settings.
WARNING
The IP address of the LAN interface should not be in the range of the
Start IP address and End IP address.
WLAN Configuration
When a compatible wireless USB dongle
installed on the N7700, the N7700 will
become an access point, and the Network
dropdown menu will contain a WLAN me
item. From the Network menu, choose
WLAN, and the WLAN Configuration
screen appears. This screen displays the
wireless network parameters of the system.
You can change any of these item
A
NOTE
• Currently supported USB
wireless dongles are: 3Com
3CRUSB10075, Zyxel G220USB,
PCI GW-US54mini.
• USB dongles have to be
connected before N7700 is
powered up.
WLAN Configuration
Item Description
MAC Address . Displays the MAC Address of the USB wireless dongle
IP Specifies the IP address of the network connection.
Netmask
.255.0 Specifies the network mask, which is generally: 255.255
ESSID ication) is the The ESSID (Extended Service Set Identif
identifying name of a wireless network.
ESSID Broadcast
.
ice that wants to
Specifies whether the ESSID will be broadcasted by the N7700.
This will prevent the Access Point from broadcasting the ESSID
The N7700 will still respond to a wireless dev
communicate if it sends a matching ESSID.
Channel el that the N7700 uses to communicate with client The chann
devices.
Auth Mode 700.
on
Authentication mode used by the N7
Shared: Shared key authenticati
Open: Open key authentication
WEP Enable Specifies whether to use encryption for transmission or not.
Key Length ed by the N7700. Key length specifies the level of encryption us
64 bit: 10 characters from 0 ~ 9 and A ~ F.
128 bit: 26 characters from 0 ~ 9 and A ~ F.
WEP KEY 1 Input up to 4 WEP keys, and select the one you wish to use.