User`s manual

iSCSI CRC/Checksum
To enable this option, the initiator can connect with “Data digest” and “Header
digest” enabled.
Network Management
Use the Network menu to make network configuration settings as well as service
support settings.
WAN Configuration
From the Network menu, choose WAN,
and the WAN Configuration screen
appears. This screen displays the network
parameters of the WAN connection. You
may change any of these items and press
Apply to confirm your settings. See a
description of each item in the following
ble: ta
WAN Configuration
Item Description
Host name Host name that identifies the N7700 on the network.
Domain name Specifies the domain name of the N7700.
MAC Address MAC address of the network interface.
Jumbo Frame Support Enable or disable Jumbo Frame Support of the WAN interface on
your N7700.
DHCP Enable or disable the N7700 from obtaining in IP address via
DHCP server. If you require a static IP, disable this feature and
input your network configuration.
IP IP address of the WAN interface.
Netmask
Network mask, which is generally: 255.255.255.0
Gateway Default Gateway IP address.
DNS Server Domain Name Service (DNS) server IP address.
IP Sharing Mode When enabled, PCs connected to the LAN port will be able to
access the WAN. Default is Enabled.
Link Aggregation Specifies whether WAN and LAN ports will be aggregated and
45