Media Server User's Manual

WEP Enable mission or not. Specifies whether to use encryption for trans
Key Length d by the N7700. Key length specifies the level of encryption use
64 bit: 10 characters from 0 ~ 9 and A ~ F.
128 bit: 26 characters from 0 ~ 9 and A ~ F.
WEP KEY 1
WEP KEY 2
Input up to 4 WEP keys, and select the one y
48
WEP KEY 3
ou wish to use.
When connecting, be sure to enter the same key and select the
same index number on each client machine.
WEP KEY 4
A DHCP server can be configured to assign IP addresses to devices connected to
L AN ports.
WLAN DHCP Configuration
Item Description
DHCP Server Select to enable or disable DHCP server.
Start IP Specifies the starting IP address of the DHCP range.
End IP Specifies the ending IP address of the DHCP range.
DNS Server Specifies the DNS server IP address.
NOTE
to exchange the functionality of
ese ports directly through the Web User
WAN
r Disable, and click Apply
save your changes. Click Cancel to exit
ithout saving.
n
press Apply
confirm your settings. A description of
ach item follows:
The IP Segment of WLAN, WAN and LAN should not overlap.
NOTE
Users should obey the international RF regulatory rules as they set up
the wireless RF channel on the N7700. The RF operating channels for
different regions have been specified as following. Thecus has no
responsibility for users attempting to violate the international RF
regulation.
11 N. America
14 Japan
13 Europe (ETSI)
2 Spain
4 France
WAN LAN Exchange
The N7700 is equipped with both WAN and
LAN ports. The WAN LAN Exchange function
allows you
th
Interface.
From the Network menu, choose the
LAN Exchange item, and the WAN LAN
Exchange Support screen appears.
Choose Enable o
to
w
Web Services Configuration
From the Network menu, choose the
Service item, and the Web Service screen
appears. This screen displays the service
support parameters of the system. You ca
change any of these items and
to
e