- Thecus Network Adapter User's Manual

Info
SES load conf. OK Info: SES configuration has been loaded.
Warning
SES Load Conf.
Failure
Error: Failed to load SES configuration. The
SES device is disabled.
Info
SES is disabled Info: The SES device is disabled.
Info
SES is enabled Info: The SES device is enabled
• Environmental events
Level Type Description
Info
Admin Login OK Info: Admin login from <IP or serial console> via
<Web UI or Console UI>.
Info
Admin Logout OK Info: Admin logout from <IP or serial console>
via <Web UI or Console UI>.
Info
iSCSI data port
login
Info: iSCSI login from <IQN> (<IP:Port
Number>) succeeds.
Warning
iSCSI data port
login reject
Warning: iSCSI login from <IQN> (<IP:Port
Number>) was rejected, reason of
1. initiator error
2. authentication failure
3. authorization failure
4. target not found
5. unsupported version
6. too many connections
7. missing parameter
8. session does not exist
9. target error
10. out of resources
11. unknown
Error
Thermal critical Error: System Overheated!!! The system will do
the auto shutdown immediately.
Warning
Thermal warning Warning: System temperature is a little bit
higher.
Error
Voltage critical Error: System voltages failed!!! The system will
do the auto shutdown immediately
Warning
Voltage warning Warning: System voltage is a little bit
higher/lower.
Info
PSU restore Info: Power <number> is restored to work.
Error
PSU Fail Error: Power <number> is out of work.
Info
Fan restore Info: Fan <number> is restore to work.
Error
Fan Fail Error: Fan <number> is out of work.
Error
Fan non-exist Error: System cooling fan is not installed.
Error
AC Loss Error: AC loss for the system is detected.
Info
UPS Detection OK Info: UPS detection succeed
Warning
UPS Detection Fail Warning: UPS detection failed
Error
AC Loss Error: AC loss for the system is detected
Error
UPS power low Error: UPS Power Low!!! The system will do the
auto shutdown immediately.
Info
Mgmt Lan Port
Active
Info: Management LAN Port is active.
Warning
Mgmt Lan Port
Failed
Warning: Fail to manage the system via the
LAN Port.
Info
RTC Device OK Info: RTC device is active.
- 67 -