Tier Loose Seating Planning & Specifications © 2000-2006 Theatre Solutions, Inc. 121 Park Avenue Quakertown, PA 18951 Tel 215-538-8033 Fax 215-538-8974 info@theatresolutions.net www.theatresolutions.
The Tier Chair About TSI ............................................................................................................................................................ 3 Tier Features ..................................................................................................................................................................... 3 Tier Options......................................................................................................................................
About TSI Theatre Solutions, Inc. (TSI) designs and produces distinctive and durable fixed seating. We are committed to providing the highest quality fixed seating and associated services in the world. Quality, aesthetics, comfort and flexibility make TSI fixed seating the preferred choice for any building type.
Warranty Tier Warranty Theatre Solutions, Inc. (TSI) warrants the Tier chair against failures and manufacturing defects for one year from the date of shipment. This warranty applies only to the original purchaser and is non-transferable. TSI will provide parts and labor to replace defective parts. This warranty does not cover damage from abuse, misuse, neglect or act of God. Damage caused by modifications to the product by anyone other than an authorized TSI technician will void this warranty.
Planning Information Theatre Solutions offers a variety of services designed to help in the planning and successful completion of any project requiring the use of loose seating. All TSI preliminary services are free to architects and potential customers. Further assistance is offered at those times when the architect has a need for custom components or a totally new product concept.
Figure 1 - Tier Front, Side, and Plan Views 6 Planning, Installation & Specification Manual Tier Loose Seating
Tier Specifications – Loose Seating PART 1 – GENERAL 1.1 RELATED DOCUMENTS A. 1.2 Drawings and general provisions of the contract, including General and Supplementary Conditions, apply to this section. SUMMARY A. This section includes the following: 1. 1.3 Freestanding chairs with hardwood frame and upholstered seat and back cushions. SUBMITTALS A. Product data for each type of product specified. B.
Tier Specifications – Loose Seating PART 2 – PRODUCTS 2.1 SEATING A. B. Provide from Theatre Solutions, Inc., 121 Park Avenue, Quakertown, PA 18951, the Tier model as follows: 1. Basic freestanding chair. 2. Upholstered seat and back cushions. 3. Hardwood frame with arms. Model noted is based on the Theatre Solutions, Inc. Tier model with the intent of establishing the high level of quality required for the project.
2.3 FABRICATION, GENERAL (cont.) C. Assembly: The chair frame is assembled with aliphatic resin glue and clamped to allow total curing of the joints. All excess glue residue is to be removed prior to hardening. Corner blocks are to be glued in place during assembly to insure a square and plumb assembly. D. Finishing: All surfaces are to be sanded with a series of sandpaper starting at 120 grit and finishing with a white wood sanding at 220 grit.
Tier Specifications – Loose Seating PART 3 – WARRANTY 3.1 The loose seating manufacturer must provide a two-year warranty to the original purchaser of the seating as follows: A. The seating manufacturer shall warrant its products against failures and manufacturing defects for two years. This warranty applies to the original purchaser and is non-transferable. The seating manufacturer will provide parts and labor to replace defective parts for two years after the installation. B.
Maintenance Instructions The Tier chairs are designed and built for years of reliable service. The durability and beauty of the chair will however, be greatly enhanced with proper care and inspection, as described below. Each project will be provided with an Operations and Maintenance (O&M) Manual which will describe in detail the maintenance measures to be taken by onsite personnel.
