User Manual

ManualsBrandsTheatre Solution ManualsFurnitureLecture Seating Aeron

Aeron Lecture Seating Specifications

Page 1 of 4

PART 1 – GENERAL

1.1 RELATED DOCUMENTS

Drawings and general provisions of the Contract, including General and Supplementary Conditions, apply

to this section.

1.2 SUMMARY

. This section includes the follo wing:

complete system of continuous worksurfaces mounted to the floor with integrated support

frames which also support self-returni ng swivel chairs.

1.3 SUBMITTALS

. Product data for each type of product specified. Include installation methods.

Shop drawings, prepared for architectural drawings and from field dimensions, showing the seating and

table layout, aisle widths as well as a section view with profile dimensions of the seating, tables, and back-

to-back row dimensions.

Samples for initial selection purposes in the form of manufacturer’s color charts or samples of materials

showing the full range of standard colors, finishes, and patterns.

1. Fabric

2. Metal Finishes

3. Wood Finishes

Statement signed by the lecture seating manufacturer confirming that the products submitted comply with

the specified requirements.

1.4 QUALITY ASSURANCE

. Provide installer’s qualification s c onfirming the installer is qualified to install the manufacturer’s chairs

B. Provide seating that complies with California Technical Bulletin 117.

Obtain the complete table/seating system, includi ng accessories and mounting com ponents, from a single

manufacturer.

Design and install seati ng with end of table aligning from first to last ro w. Comply with ADA rules and

regulations.

1.5 PROJECT CONDITIONS

Environmental Conditions: Do not install lecture seating and tables until space is enclosed an d

weatherproof, wet work in space is complete and dry, installation of finishes including painting is complete,

and ceilings are complete. Do not instal l lecture seating and tables until ambient temperature and humidity

conditions are continuo usly maintained at final occupancy values.

1.6 DELIVERY, STORAGE, AND HANDLING

Deliver tables and frames in manufacturer’s original wrapping and the sea ting in manufacturer’s unopen ed

cartons clearly labeled with manufacturer’s name and contents.

B. Handle seating and tables in manner to prevent damage.

PART 2 – PRODUCTS

2.1 SEATING

Provide from Theatre Solutions, Inc., 121 Park Avenue, Quakertown, PA 18951, the Aeron

Lecture

Seating as follows:

1. Basic floor mounted seat/table supports.

eron chairs.

3. Plastic laminate worksurfaces with _________ edge.

Model noted is based on the Theatre Soluti ons, Inc. Aeron Lecture Seating with the intent of establishing

the high level of quality required for the project. Other brands submitted for approval will be given

consideration provided that a full se ating mock-up, along with a complete list of specificati on discrepancies

between the proposed substitution and the product specified is received at least 10 working days prior to

Summary of content (4 pages)

PAGE 1
Aeron Lecture Seating Specifications Page 1 of 4 PART 1 – GENERAL 1.1 RELATED DOCUMENTS A. 1.2 Drawings and general provisions of the Contract, including General and Supplementary Conditions, apply to this section. SUMMARY A. This section includes the following: 1. 1.3 A complete system of continuous worksurfaces mounted to the floor with integrated support frames which also support self-returning swivel chairs. SUBMITTALS A. Product data for each type of product specified.
PAGE 2
Aeron Lecture Seating Specifications Page 2 of 4 the bid date. 1. By offering a quote for this project, the bidder assumes full responsibility for complying with the specifications for this project and shall be totally responsible for any expenses incurred if the product quoted does not comply with the specifications. C. Failure to comply with the warranty described in Part 4 of these specifications will be cause for disqualification. 2.2 MATERIALS A. 2.
PAGE 3
Aeron Lecture Seating Specifications Page 3 of 4 1. 3mm PVC – 3mm x 1-1/4” PVC on all table edges that would be exposed after installation, with a 1/8” radius on the top and bottom edges. The table corners are square with an overlap joint. 2. 3mm Hardwood – 3mm x 1-1/4” hardwood on all table edges that would be exposed after installation, with 1/8” radius on the top and bottom edges, finished to match the architect’s sample. The table corners are square with an overlap joint. 3.
PAGE 4
Aeron Lecture Seating Specifications Page 4 of 4 D. Provide manufacturers standard power/data module consisting of two electrical outlets and two Category 6 RJ-45 data jacks. Electrical and data jacks are to be black in color. The module shall be mounted in the worksurface centered and shared between two seated occupants. E. 3.6 Provide necessary quantities of manufacturers standard wire management raceways for the concealment and routing of data wiring.