Instruction Manual

62 Specifications Jury Base Seating
Jury Base Seating Specifications
(This section pertains to the Forum Jury Base Seating model.)
PART 3 – OPTIONS
3.1
A
RMS
A
.
A
rms shall be constructed of a steel bar with a self-skinned urethane overmolding. Arms shall be attached
to the chair with an 11 gauge cold-rolled steel bracket. The arms shall be attached to the bracket with (2)
M6 x 20mm bolts, and the bracket shall be attached to the chair frame with (3) 1/4-20 x 1-1/4 Grade 5
bolts.
3.2 TILT MECHANISM
A
. Chair shall include a tilt mechanism with a tilt tension adjustment.
3.3 COMPLIANCE WITH CALIFORNIA TECHNICAL BULLETIN 133