Owner's Manual

3 of 4
Step 4
Attach Partition Shelf (D) to Side Frame (B)&(C) using 4-M6x35MM Hex Bolts (G). NOTE: DO NOT
TIGHTEN ALL BOLTS AT THIS TIME ! Align Back Panel (F) with groves in Side Frame Assembly
(B)&(C)-Silde Back panel (F) into place. Thread 2-M6x20MM Hex Bolts (H) thru Back Panel (F) in to
threaded inserts in back edge of Partition Shelf (D). NOTE: TIGHTEN ALL BOTLS AT THIS TIME !
D
F
G
J
H
J
I
E
Step 5
Insert 8-Shelf Clips (I) in Holes on Side Frames (B)&(C) at desired location.Place Shelves (E) on Shelf
Clips (I).