Assembly Instructions Parts NO. DRAWING DESCRIPTION QTY NO.
NO. DRAWING DESCRIPTION QTY NO. G M6x35MM BOLT 8 H M6x20MM BOLT I J DRAWING DESCRIPTION QTY K BRACE PLATE 2 2 L 4x15 SCREW 4 SHELF CLIP 8 M ANTI-TIP 1 ALLEN KEY 1 Step 1 Read through these instructions thoroughly before beginning assembly. We have found this to be of great value when assembling this product. Step 2 Remove all parts and hardware from packing material.
Step 4 Attach Partition Shelf (D) to Side Frame (B)&(C) using 4-M6x35MM Hex Bolts (G). NOTE: DO NOT TIGHTEN ALL BOLTS AT THIS TIME ! Align Back Panel (F) with groves in Side Frame Assembly (B)&(C)-Silde Back panel (F) into place. Thread 2-M6x20MM Hex Bolts (H) thru Back Panel (F) in to threaded inserts in back edge of Partition Shelf (D). NOTE: TIGHTEN ALL BOTLS AT THIS TIME ! G J F H D J Step 5 Insert 8-Shelf Clips (I) in Holes on Side Frames (B)&(C) at desired location.
Step 6 Attach Storage Hutch to Storage Base using 2-Brace Plates (L) and 4-4x15MM Screws (M). L K CARE Clean with a non abrasive cloth using a mild soap. Make sure to wipe dry.
