Installation & Assembly

STEP 3
Attach Cam-Lock Screw (5) into the pre-drilled holes on Panel (A).
STEP 2
Attach Panel (D) to Panel (B)&(C) and tighten with Screw (1).
STEP 1
1.1 Insert Dowel (2) to Panel (B)(C)(D).
1.2 Insert Cam-Lock Nut (4) into Panel (D).
Note: Arrow on Cam-Lock Nut (2) should be pointing towards hole.
(4)x1pc
(2)x2pcs
(2)x8pcs
(D)x4pcs
(1)x8pcs
(5)x4pcs
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
1
2
3
16pcs
48pcs
8pcs
A 2pcs
Top Panel
Nail Leg
No Hardware List Qty No QtyParts List
Chipboard Screw
Dowel
4
5
6
8pcs
8pcs
2pcs
Non-Woven Bin
Cam-Lock Nut
Cam-Lock Screw
B
C
2pcs
2pcs
Bottom Panel
Shelf Panel
D 8pcs
Leg Panel
unfinised
surface
Note: All the hardware quantity are for two set.