Use and Care Manual
3
www.litokol.it
Products to grout
APPLICATION DATA
Waiting time for grouting
Floor installation with standard setting adhesive: 24 hours
Floor installation with quick setting adhesive: 4 hours
Cladding installation with standard setting adhesive: 6-8 hours
Cladding installation with quick setting adhesive: 4 hours
Mixing ratios
Part A: 93.7 parts by weight
Part B: 6.3 parts by weight
The two parts are pre-batched in their respective packaging.
Mix consistency
Thixotropic paste
Specific gravity of mix
1.6 kg/L
Mix pot life
About 1 hour at T = +23°C
Allowed application temperatures
From +10°C to +30°C
Recommended application temperatures
From +18°C to +23°C
Walk-on time
About 24 hours at T=+23°C
Ready for use
7 days at T =+23°C
Joint width
From 1 to 15 mm
Consumption
EPOXY MORTAR
Size (cm)
Joint width (mm)
Consumption (kg/m²)
MOSAICS
1.0X1.0X0.4
1.5X1.5X0.4
1.5X1.5X0.6
1.5.X1.5.X0.8
1.5X1.5X1.0
2.3X2.3X0.4
2.3X2.3X0.6
2.3X2.3X0.8
2
1.4
1.2
1.8
2.4
2.7
0.85
1.3
1.7
CKLINKER
12x24x1.2
25x25x1.2
5-8-10
1.16-1.86-2.33
0.74-1.19-1.49
10 x 10 x 0.6
15 x 15 x 0.6
3-4-6
0.56-0.74-1.12
0.37-0.50-0.74
15 x 20 x 0.6
25 x 25 x 1.2
3-4-6-8
0.33-0.43-0.65-0.87
0.45-0.60-0.89-1.19
25 x 33 x 0.8
33 x 33 x 1
4-8-10
0.35-0.70-0.87
0.38-0.75-0.94
30 x 45 x 1
45 x 45 x 1.2
4-10
0.34-0.86
0.33-0.83
50 x 50 x 1.2
60 x 60 x 1.2
6-10
0.45-0.74
0.37-0.62
ADHESIVE
Trowel notch (mm)
Consumption (kg/m²)
2
1.1
3.5
1.6
8
3
10
3.5
PERFORMANCE
Shear adhesion to initial cut
≥ 2 N/mm
2
EN 12003
Shear adhesion strength after water immersion
≥ 2 N/mm
2
Shear adhesion after thermal shocks
≥ 2 N/mm
2
Open time
≥ 0,5 N/mm
2
after 50 minutes
EN 1346
Slip resistance
≤ 0.5 mm
EN 1308
Resistance to abrasion
≤ 250 mm
3
EN 12808-2
Flexural strength after 28 days at standard conditions
≥ 30 N/mm
2
EN 12808-3
Compression strength after 28 days at standard
conditions
≥ 45 N/mm
2
EN 12808-3
Shrinkage
≤ 1.5 mm
EN 12808-4
Water absorption after 4 hours
≤ 0,1 g
EN 12808-5
Temperature of use
From – 20°C to +100°C
Chemical resistance
See Table