TDS

3
Products to grout and clean
ADESIVI CEMENTIZI
www.litokol.it
APPLICATION DATA
Recommended adhesives for laying mosaics
Cement foundations, plaster of Paris base, old tiles: Hyperflex K100
Wood, metal, fibreglass-reinforced plastic panelling: Litoelastic
Plexiglass: Primer 1217 + OTTOCOL M501 transparent
Glass: OTTOCOL M501 transparent
Recommended Trowel for the Adhesive
Trowel with 1/8” square notches, always follow manufacturers recommendations
Waiting time for grouting after adhesion
24 hours or recommended by the adhesive instructions
Mixing ratio
Component A: 100 parts in weight
Component B: 8.3 parts in weight
The two components are pre-dosed in their respective packs
Consistency of the mixture
Dough, soft paste mixture
Specific weight of the mixture
1.55 kg/l
Useable time of the mixture
About 1 hour at Temperature of 65-75°F
Application temperatures
Admissible: from 55°F to 85°F - Recommended: from 65 to 75°F
Can be walked on or used after
24 hours at T=65-75°F
Working time
5 days at T=55-65°F
Width of the joints
Up to 1/8” (3.175 mm)
IDENTIFICATION DATA
Appearance
Component A: translucent paste
Component B: thick liquid
Colour
Crystal C.350
Customs classification
35069190
Storage time
24 months in the original packs in a dry place
PERFORMANCE
Abrasion resistance (EN 12808-2)
≤ 250 mm
3
Mechanical resistance to bending after 28 days in standard condition (EN 12808-3)
≥ 30 N/mm
2
Mechanical resistance to compression after 28 days in standard conditions (EN
12808-3)
≥ 45 N/mm
2
Shrinkage (EN 12808-4)
≤ 1,5 mm/m
Water absorption after 4 hour (EN 12808-5)
≤ 0,1 g
Operating temperatures of installed material
From – 4°F to +212°F