SDS

-
-
Page 2/8
Safety Data Sheet
acc. to OSHA HCS
Printing date 12/02/2016 Rev. 4 Reviewed on 11/10/2016
Trade name: EPOXYSTUK X 90 (comp A)
·
Other hazards
·
Results of PBT and vPvB assessment
·
PBT:
Not applicable.
·
vPvB:
Not applicable.
(Contd. of page 1)
*
*
3 Composition/information on ingredients
·
Chemical characterization: Mixtures
·
Description:
Mixture of the substances listed below with nonhazardous additions.
·
Dangerous components:
CAS: 25068-38-6 reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular 5-10%
weight

700)
CAS: 13463-67-7 titanium dioxide 5-10%
CAS: 9003-36-5 formaldehyde, oligomeric reaction products with 1-chloro-2,3-epoxypropane and phenol 2.5-5%
CAS: 68609-97-2 oxirane, mono[(C12-14-alkyloxy)methyl] derivs 1-2.5%
CAS: 38640-62-9 bis(isopropyl)naphthalene 1-2.5%
CAS: 8001-78-3 Castor oil, hydrogenated 1-2.5%
4 First aid measures
·
Description of first aid measures
·
After inhalation:
Supply fresh air and to be sure call for a doctor.
In case of unconsciousness place patient stably in side position for transportation.
·
After skin contact:
Immediately wash with water and soap and rinse thoroughly.
If skin irritation continues, consult a doctor.
·
After eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
·
After swallowing:
Do not induce vomiting; immediately call for medical help.
·
Information for doctor:
·
Most important symptoms and effects, both acute and delayed
No further relevant information available.
·
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
5 Fire fighting measures
·
Extinguishing media
·
Suitable extinguishing agents:
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
·
Special hazards arising from the substance or mixture
No further relevant information available.
·
Advice for firefighters
·
Protective equipment:
Wear fully protective suit.
Do not inhale explosion gases or combustion gases.
6 Accidental release measures
·
Personal precautions, protective equipment and emergency procedures
Not required.
·
Environmental precautions:
Inform respective authorities in case of seepage into water course or sewage system.
Do not allow to enter sewers/ surface or ground water.
·
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
·
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
(Contd. on page 3)
US