Installation Guide

Fields of application

Suitable for acid-resistant installation and grouting of ﬂoor and wall tiles and mosaic in interiors

and exteriors. Suitable for applications where the surfaces are exposed to aggressive chemical

substances (see chemical resistance table) such as dairies, abattoirs, pubs, food factories in

general.

It is also recommended for grouting swimming pools and tanks, containing thermal or brackish

water.

2 PART EPOXY MORTAR

EPOXYSTUK X90

EXCLUSIVE DISTRIBUTOR FOR USA

Tile Doctor

www.TileDoctor.com

877-TileDoc (845-3362)

Made In Italy

For installation and grouting of ceramic tiles

with joint widths between 1 and 15 mm

Available in 4 colors - matt ﬁnish.

1-15

waterproof

PAGE 1
EPOXYSTUK X90 2 PART EPOXY MORTAR For installation and grouting of ceramic tiles with joint widths between 1 and 15 mm Available in 4 colors - matt finish. 1-15 mm waterproof Fields of application Suitable for acid-resistant installation and grouting of floor and wall tiles and mosaic in interiors and exteriors. Suitable for applications where the surfaces are exposed to aggressive chemical substances (see chemical resistance table) such as dairies, abattoirs, pubs, food factories in general.
PAGE 2
No more stains and dirt with Epoxystuk X90 waterproof grout The joints are always the critical point in terms of cleanliness of a tiled surface. Epoxystuk X90 is completely waterproof and makes the grouting surface stain-proof and easy to wash with normal detergents on the market. The benefits of easy-to-clean grouting that doesn’t absorb liquids or stains Absorbent cement grouting is a critical obstacle in cleanliness of tiled surfaces.
PAGE 3
Easy to clean even for applications on very rough R12 tiles R12 Thanks to the experience developed over the years in the epoxy adhesive and grouts, Litokol has developed Epoxystuck X90 formula and achieved an easy to apply and easy to clean grout by simply wiping with a sponge, even with the roughest non-slip R12 tiles.