Use and Care Manual

3
Grouts
CEMENTI
TIOUS
ADHESIV
ES
www.litokol.it
APPLICATION DATA
Recommended adhesives for
mosaic tile laying
Cement and gypsum-based substrates (treated with Primer C), existing tiles (treated with Prepara Fondo
EVO): Litoplus K55 (class C2TE)
Wood, metal, fibreglass panelling: Litoelastic EVO (class R2T)
Plexiglass: Primer 1217 + OTTOCOL M501 transparent
Glass: OTTOCOL M501 transparent
Recommended trowel
V-notch trowel, 2 mm (art. 910)
Ready for grouting
24 hours
Mix ratio
Component A: 93.7 parts by weight
Component B: 6.3 parts by weight
The two components are pre-measured in their respective packaging
Consistency of mix
creamy
Specific gravity of mix
1.55 kg/l
Pot life
About 1 hour at T=+23°C
Application temperatures
Allowed: from +10°C to +30°C - Recommended: from +18°C to +23°C
Set to light foot traffic
24 hours at T=+23°C
Ready for use
5 days at T=+23°C
Joint width
Up to 3 mm
Consumption table
SAFETY INFORMATION
Consult the product safety data sheets, available on request.
PRODUCT FOR PROFESSIONAL USE.
ITEM SPECIFICATION
The decorative grouting of joints between clear or artistic vitreous
mosaics applied to floors or walls in indoor and outdoor locations,
must be carried out using a two-component acid-resistant
translucent epoxy grout such as Starlike
®
Crystal EVO by Litokol
S.p.a. Grouting will be smooth and compact, without any cracks,
non-absorbent, uniform in colour, UV resistant and weatherproof.
IDENTIFICATION DATA
Appearance
Component A: translucent paste
Component B: thick liquid
Colour
Crystal 700
Customs code
35069190
Shelf life
24 months in original packaging when stored in a dry place
PERFORMANCE
Resistance to abrasion (EN 12808-2)
≤ 250 mm
3
Mechanical flexural strength after 28 days in standard conditions (EN 12808-3)
≥ 30 N/mm
2
Mechanical compressive strength after 28 days in standard conditions (EN 12808-3)
≥ 45 N/mm
2
Shrinkage (EN 12808-4)
≤ 1.5 mm/m
Water absorption after 4 hours (EN 12808-5)
≤ 0.1 g
Temperature of use
From – 20°C to +100°C