Product Brochure
STARLIKE
®
ColorCrystal EVO
1 Empty completely all the contents of the catalyst (B) onto the paste (A).
2
Mix at slow speed using an electric drill equipped with mixing paddle.
Scrape the walls of the bucket to eliminate all parts of non-catalysed product.
3
The joints must be dry. Introduce the mortar into the joints using the suitable green rubber float
(art. 946GR) spreading diagonally across the joints. Remove the excess product.
4
The grout must be cleaned while the product is still wet. Sprinkle clean water. Initial cleaning using a moistened white felt (art. 109/GBNC)
making circular movements. Ensure no water enters the joints. Any adjustments to the grout must be performed before cleaning with water.
5 Now perform a second cleaning with a rigid cellulose sponge (art. 128G0001).
6
Any stains of the transparent product can be removed after 24 hours or anyway after the gap has hardened.
Use HAZE REMOVER. Spread HAZE REMOVER with the white felt.
7 Leave on for 15-30 minutes. Scrub the surface with the white felt.
8 Rinse with clean water. Dry immediately with a clean cloth and do not wait for the evaporation of the rinse water.
EXCLUSIVE DISTRIBUTOR FOR USA
Tile Doctor
www.TileDoctor.com
877-TileDoc (845-3362)
Made In Italy
Application
AA
BB
Litonet EVOLitonet EVO
Litonet Gel EVOLitonet Gel EVO
Mixture life: About 1 hour at T= +23°C / 73,4°F
Application temperature: from +12°C to +30°C / From + 64,4°F to 73,4°F
Recommended application temperature: from +18°C to +23°C / From 64,4°F to 73,4
Walkable after: 24 hours at T= +23°C / 73,4°F
Ready for use: 5 days at T= +23°C / 73,4°F
Storage time: 24 months in original packaging, avoid freezing temperatures.
Packaging: 1, 2.5 and 5 kg buckets
Mixing ratios: Component A: 93.7 parts by weight - Component B: 6.3 parts by weight -
The two components are pre-measured in their respective packaging
Consistency of the mix: creamy grout
Specific gravity of mix: 1.55 kg/l
Joint width: Up to 3 mm
Art. 946GR Art. 109/ G Art. 128/ G HAZE REMOVER
ADVISED TOOLS