Full Product Manual

!
Art. 925G
1
2
3
4
1
2
3
4
1
2
3
4
Remove the old grout with the grout rake (Art. 925G) for at least 2 mm of thickness, taking care of cleaning the tiles sides.
To remove the residues of dust.
Apply Starlike
®
using the special green rubber trowel (Art.946GR) filling completely the grouts.
Perform an initial cleaning using the trowel equipped with moistened white feltt (Art.109/G).
The surface grouting finish should be carried out using sponge in sweepex (Art. 128/G) and water.
Possible present halos on the tiles can be removed after 24 hours using the cleansing Litonet.
1) Quite el viejo rejuntado de cemento con la herramienta Limpia-juntas (Art. 925G) para un espesor de al menos 2 mm y teniendo
cuidado de limpiar los bordes de los azulejos. Quitar los residuos de polvo.
2) Aplicar Starlike
®
con la espátula de goma (Art.946GR) llenando las juntas por completo
3) Realizar una primera limpieza con agua utilizando el fieltro blanco (Art.109/G).
4) Acabar la superficie del rejuntado con una esponja en sweepex (Art. 128/G) y agua.
Las manchas presentes en los azulejos se pueden eliminar después de 24 horas utilizando el detergente Litonet.
Steps of Restoration
Fases de restauración
13