User manual

Range Meaning
Display area Use the radio buttons ‘Mag’ or ‘Phase’ to switch the diagram from Carte‐
sian coordinates (level vs. frequency) to polar coordinates (angle vs. fre‐
quency).
Use the radio button ‘SHOW ALL EQ’ to show the parameters for all the
frequency bands.
Control area You can enter the parameters of the parametric equalizer for each input
channel and all frequency bands (numbered with ‘PEQ’ ) in the left part of
the window directly as numerical values: Centre frequency, lter quality,
slope, lter type. With the ‘Bypass’ button, the equalizer for the respective
frequency band and the respective channel can be turned o temporarily.
In the middle part of the window ( ‘PEQ Parameter’ ) you can set the
parameters centre frequency, lter quality, and slope using the faders.
The setting refers to the frequency band that is highlighted green in the
left part of the window.
You can select the cut-o frequency and the lter type for the low pass
and the high pass lter. Use the ‘Bypass’ button to temporarily turn o
the lter.
Operating
digital speaker management system
48