User manual

Range Meaning
Display area Select ‘Mag’ to set the ‘PEQ’ , high pass, and low pass parameters. Select
‘Phase’ to set the phase curve. You can also synchronously display the
parametric equalizer and the phase curve of a channel that is not cur‐
rently selected.
Control area You can enter the parameters of the parametric equalizer for each input
channel and all frequency bands (numbered with ‘PEQ’ ) in the left part of
the window directly as numerical values: Centre frequency, lter quality,
slope, lter type. With the ‘Bypass’ button, the equalizer for the respective
frequency band and the respective channel can be turned o temporarily.
In the middle part of the window ( ‘PEQ Parameter’ ) you can set the
parameters centre frequency, lter quality, and slope using the faders.
The setting refers to the frequency band that is highlighted green in the
left part of the window.
Comp: Click on ‘Set’ and drag the fader with the mouse to set the param‐
eters of the compressor function for the Aux channel: Compression ratio,
ratio, limit, start time, recovery time.
AutoMix: Click on ‘O/On’ to activate the AutoMix function. Click on
‘Set’ . In the ‘Select’ area, select the input channel. Enter the parameters
for the threshold, start time, and recovery time.
Operating
8x8 Matrix
45