User manual

1 [USB TO COMPUTER]
USB port for connection to a computer for use as an audio interface as well as for power supply.
2 [MIC TO CH 1]
To connect the microphone when using a headset, signal processing via channel 1.
3 [MONITOR - HEADSET]
To connect the headphone when using a headset.
4 [PHANTOM]
Turns the phantom power on and o for condenser microphones on the XLR inputs. The LED above the switch is lit when
the phantom power is activated.
5 [POWER]
The LED lights up once the unit is powered.
6 [USB playback]
When the switch is pressed, the USB input signal is assigned to the ‘MONITOR’ output, otherwise to the ‘MAIN MIX’
output.
Connections and controls
mixer
14