User manual

3.3 Transmitter
1. Make sure that the transmitter is turned off, the main switch is in ‘OFF’ position.
2. Open the battery compartment cover by pressing on the fastening and sliding it down.
3. Insert the batteries. Pay attention to the correct location of the poles.
4. Close the battery compartment and turn on the transmitter. Slide the power switch to
the 'ON' position. The LED lights up briefly.
5. Turn on the transmitter and check the transmission by speaking of singing. If necessary,
adjust the level on the receiver, on your mixing console or your amplifier.
Inserting batteries into the
receiver
Installation and starting up
TWS One Vocal
13