User manual

13 Head grill to protect the microphone and to reduce wind and breath noise.
14 Lower housing part. Unscrew to open.
15 Main switch. Keep this button pressed for some seconds to switch the unit on or off.
16 Pilot light
This LED lights up when the unit is switched on.
17 Coloured marking, symbolizing the frequency range.
18 Indication of the frequency range in which the device operates. This specification must match the indication printed
on the underside of the receiver.
19 CHANNEL
Rotary control to select a channel 1 to 16. Both transmitter and receiver must be tuned to the same channel.
20 Battery compartment for two mignon cells (AA, LR06), 1.5 V or rechargeable battery. To open the compartment press
the clip gently in arrow direction, then lift it up. To close it, push the clip down until it clicks into position.
Components and functions
TWS 16 HT
31