User manual
Table Of Contents
1 POWER
Main switch to turn the device on and off.
2 This indicator lights up red when the unit is turned on and operational.
3 CH
Rotary control to select a channel 1 to 16.
4 AF
This indicator lights up red when an audio signal is received.
5 RF LEVEL
These LEDs indicate the strength of the received carrier signal. The more LEDs light up, the better is the reception. If
no LED is lit no signal is received.
6 VOLUME
Use this control to adjust the output level of the two audio outputs on the rear panel.
Components and functions
TWS 16 HT
27