User manual

6 Operating on the unit
You can lock the control centre of the conference system with a password. To unlock the
system, press any button on the control panel. Then enter the password.
1. Press [Monitor] for about 3 seconds.
ð
The password setting is called up.
2. Turn [Speaker] right or left to select the desired number for the rst digit eld.
3. Turn [Monitor] to the right to move to the next digit eld.
4. Repeat steps 2 and 3 until you have entered the desired 4-digit password.
5. Press [Speaker] to conrm the password.
ð
Your desired password is now set. The display returns to the starting position.
1. Press [PRE / EQ] for about 3 seconds.
ð
The EQ settings table is called up.
2. With [Monitor] you move to the right or left within the table.
Setting a password
Setting the EQ
Operating on the unit
Speech 100 M
27