User manual

1. Connect the [IN] interface of the rst call station (33) to the [CONFERENCE INPUT] inter‐
face of the control centre. To do so, use a LAN cable.
2. Connect the [LINK] interface of the rst call station (32) to the [IN] interface of a further
call station. To do so, use a LAN cable.
3. Repeat step 2 until you have connected the desired number of call stations to a line.
You can connect a maximum of 2 lines, each with 16 call stations, to the control centre.
This is how to attach the microphone to the call station:
1. Plug the microphone on the microphone jack [23].
ð
The microphone snaps into place with a click.
2. You can release the microphone from the call station with a light push on the [PUSH]
lever.
Microphone installation
Installation
conference system
18