User manual

Select the menu item ‘4. Hi Freq. Boost’. Press [SET]. ‘Hi Freq. Boost’ appears in the top row of
the display.
Use the [+] / [–] buttons to turn the treble boost (increasing the high frequencies) on or off
(display shows ‘ON’ or ‘OFF’). If this function is turned on the high frequencies of the trans‐
mitted signal are boosted. The field ‘HF’ appears in the display. When the function is disabled
there is no boost. When the desired mode is shown, press [SET] to confirm the setting and to
leave this menu item.
Select the menu item ‘5. Limiter’. Press [SET]. ‘Limiter’ appears in the top row of the display.
Use the [+] / [–] buttons to turn the overload protection (dynamic limiter) on or off (display
shows ‘ON’ or ‘OFF’). When the desired mode is shown, press [SET] to confirm the setting and
to leave this menu item.
Select the menu item ‘6. Key lock’. Press [SET]. ‘Key lock’ appears in the top row of the display.
Use the [+] / [–] buttons to toggle between locked (display shows ‘ON’) and unlocked (display
shows ‘OFF’) operation. In locked mode, the system settings can be viewed, but not changed.
The display shows a key symbol then. When the desired mode is shown, press [SET] to confirm
the setting and to leave this menu item.
Enabling treble boost
Enabling overload protection
Locking the settings
Setting up the receiver
UHF receiver
26