User manual

As an alternative to selecting the frequency group and channel, you can also adjust the trans‐
mission frequency directly.
Select the menu item ‘1. Frequency’. Press [SET]. ‘Frequency’ appears in the top row of the dis‐
play.
Use the [+] / [–] buttons to increase or decrease the displayed value. When the desired value is
shown, press [SET]. The display shows the confirmation prompt ‘Setup is Changed. Do you Want
to Save?’. Press ‘+’ to apply the changed settings and quit this menu item, or press ‘–’ to leave
this menu item without saving the changes.
In the bottom row, the display shows the used transmission frequency in MHz.
Select the menu item ‘3. Stereo/Mono’. Press [SET]. ‘Stereo/Mono’ appears in the top row of the
display.
Use the [+] / [–] buttons to toggle between mono and stereo operation. When the desired
mode is shown, press [SET] to confirm the setting and to leave this menu item.
Setting the frequency directly
Selecting the operating mode
Setting up the receiver
IEM 200 R
25