User manual

Select the menu item ‘2. Group/Channel’. Press [SET]. ‘Setup Group’ appears in the first row of
the display.
Use the [+] / [–] buttons to increase or decrease the displayed value. When the desired value is
shown, press [SET] to confirm the setting and to proceed to the channel setting. ‘Setup Chan’
appears in the first row of the display.
Use the [+] / [–] buttons to increase or decrease the displayed value. When the desired value is
shown, press [SET]. The display shows the confirmation prompt ‘Setup is Changed. Do you Want
to Save?’. Press ‘+’ to apply the changed settings and quit this menu item, or press ‘–’ to leave
this menu item without saving the changes.
In the bottom row, the display shows the used transmission frequency in MHz that is assigned
to the set combination of frequency group and channel.
Transmitter and receiver must be set to the same combination of frequency group
and channel. If you use multiple wireless systems from this device family, for best
results you should assign all systems to the same frequency group, but give each
system a different channel.
Selecting frequency group and
channel
Setting up the receiver
UHF receiver
24