User manual

If you don't want to synchronise the transmitter with the receiver using the infrared interface,
you can also set the transmission frequency manually.
1. Press the lid of the battery compartment of the bodypack transmitter on one side and
ip the lid open. The buttons for operating the unit are located above the batteries.
The buttons for operating the unit are located in a recess. Use a ballpen or
another suitable sharp tool to press the buttons.
2. Press [SET] until the numeric value ashes in the display.
3. Use the arrow buttons to select the desired frequency.
Press [SET] to conrm the selection.
ð
The selected transmission frequency is set.
Setting the frequency manually
Operating
freeU Twin HT, freeU Twin PT
43