User manual

Press on the receiver repeatedly until the display shows ‘SCAN’ .
ð
The ‘SCAN’ display blinks. The device checks the set combination of frequency
group and channel on possible interferences.
If the set channel is free, the display shows the frequency with the status message
‘PF’ .
If the set channel is not free, the display shows the frequency without the status
message ‘PF’ . In this case search for a free channel.
1.
Press on the receiver repeatedly until the display shows ‘SCAN’ .
ð
The ‘SCAN’ display blinks.
2. Press the arrow keys while ‘SCAN’ is blinking.
ð
The device searches automatically for a free channel. If a free channel has been
found, the display shows the frequency with the status message ‘PF’ .
Check the frequency
Searching for a free channel
Operating
UHF wireless system
38