User manual

1.
Prepare the receiver for the synchronisation ( Ä ‘Synchronising the receiver with the trans‐
mitter’ on page 39).
2. Press the lid of the battery compartment of the bodypack transmitter on one side and
ip the lid open. The infrared sensor [IR] of the unit is located above the batteries.
3. Hold the infrared sensor of the bodypack transmitter near the infrared interface of the
receiver.
ð
The settings of the receiver are transmitted to the bodypack transmitter and are dis‐
played.
Synchronising the bodypack
transmitter with the receiver
Operating
UHF wireless system
42