User manual

1.
Press and hold on the receiver until the display shows ‘F---’ .
ð
The ‘IR’ display blinks.
2. Hold the infrared sensor of the transmitter near the infrared interface of the receiver.
ð
The settings of the receiver are transmitted to the transmitter.
3. Once the synchronisation is nished, the display returns to the default state and ‘IR’
lights permanently.
1. Disconnect the power adapter of the receiver from the power supply.
2. Hold [POWER] down and reconnect simultaneously the power adapter of the receiver to
the power supply.
Synchronising the receiver with
the transmitter
Performing a hardware reset
Operating
freeU HT, freeU PT
39